FRITSCH PULVERISETTE 16 cast iron - Manual (Page 12)

Page 11
PULVERISETTE 16
Process Action Dangers
Opening and closing
of the mill housing Only close the door when the con-
tact surfaces are absolutely free of
grinding material and other con-
taminants. Mechanical components and
the seal can be damaged.
Do not open “pulverisette 16”
while the motor is running. In the grinding of toxic or oth-
erwise harmful substances,
there is a risk of inhalation of
dusts that are harmful to health.
Do not open the “pulverisette 16”
and release the motor brake at the
same time. Risk of injury from the unbraked
cross beater.
Adding material for
grinding Add material for grinding slowly
and continuously into the filling
funnel. Adding too large an amount can
bring the
“pulverisette 16” to a stop and
could damage mechanical com-
ponents.
During grinding, dust-sized grind-
ing material can escape from the
filling funnel. Use a vacuum hood
when working with toxic or other-
wise harmful materials. Danger of inhalation of harmful
dusts.
Some grinding materials form ex-
plosive mixtures in air.
Check the material properties of
your grinding material. Risk of explosion.
Cleaning Pull the power plug before every
cleaning. Life-threatening risk of electric
shock
Do not clean with flowing water Life-threatening risk of electric
shock