Fire By Design AUTOMATED TIKI TORCH - Manual (Page 8)

8
Step 9
In the photo at left you are looking at a close up of
the bottom of the Tiki Torch Head. Unless a
custom configuration is requested there will be the 2
wires as shown along with a ½” coupling.
Flare connection
for Gas Hose
Step 10
Attach the wires from the tiki torch head to the 2
wires coming up inside the center of the pole. We
recommend wrapping the wires that are coming up
through the pole counter clockwise around the gas
line 3 full turns in anticipation of threading the tiki
head onto the gas line.
Step 11
Thread the tiki torch head onto the tiki pole and then
secure by tightening the 3 set screws in the base of
the tiki torch head.
Installing the Tiki Torch Head