Fire By Design AUTOMATED TIKI TORCH - Manual (Page 11)

11
Maintenance
Prior to Each Use
1. Inspect for debris in Fire Feature – remove debris prior to use
Semi-Annually
1. Visually inspect Pilot Burner for debris/insect infestation (spider webs)
2. Visually inspect burner for debris/insect infestation
3. Clean either of the above as necessary using compressed air.
Annually
1. Visually inspect Burner for excess corrosion due to heat and moisture.
2. Turn fire feature on to ensure proper operation.
Replacement Parts
WARNING
Maintenance should be done by a qualified service technician.
The appliance should be inspected before use and at least annually by a qualified service technician.
WARNING
Ensure gas and power are shut off and appliance is cool before servicing.
WARNING
Any guard or protective device removed for servicing must be replaced prior to operation.
Item Letter Part Name Part #
A Wind Cap WC
B Burner TB
C Thermal Sensor TTS
D Hot Surface Igniter HSI
E Gas Valve TGV
F FBD Controller FBDC
A
B
C
D
E
F