Cautions care of the ribbon – Eowave Ribbon User Manual
Page 2

Cautions
Care of the Ribbon
Before using the Ribbon, make sure you have read the following instructions carefully, as well
as the instructions for use.
Refer servicing to qualified service personal
Do not try to repair the Ribbon. Please contact Eowave for technical support.
Avoid all sharp object contact on the Ribbon.
Do not use the Ribbon or store it under extreme temperature conditions or expose it to direct
sunlight, damp or dusty areas, areas prone to strong vibrations.
Before you plug in the Ribbon, always check the voltage.
Protect the Ribbon against violent shocks.
Before using the Ribbon in a foreign country, check if the voltage is compatible.
When the Ribbon is not used, disconnect the unit from its power supply.
Never place heavy objects on the Ribbon.
Never touch the Ribbon with wet hands when it is plugged in.
Before moving the Ribbon, make sure the unit is disconnected from other devices.
Before cleaning the Ribbon, make sure the unit is switched off and not plugged in.
During lightning, unplug the Ribbon.
The Ribbon is not a light saber. It is not made for fighting.
Make sure your body is well isolated from the ground.
The Ribbon surface is fragile. Only use your
finger to play on it. Avoid playing with sharp
objects, wood sticks, pens, chop sticks…
Clean the Ribbon with a dry cloth. Never use
any detergent or Acetone on it or on the plexi
enclosure.
Clean the tactile pad with a dry cloth. Never
use any detergent or Acetone on it or any
sharp objects.