Eowave Eobody1 - Manual (Page 9)

III.1. Power eo•body
9
manual ©eowave/Ircam 2003
user’s manual • III - First steps
Connect a 9 V DC / 500 mA power plug into the power plug connector of eo•body. The red LED
lights up when eo•body is well connected. An internal fuse is activated when not plugged right.
220V or 110 AC
/ 9V DC adapter Mains
220V - 110V AC
9V DC
- +
III - First steps
A pigtail D-sub cable is delivered with eo•body. The D-SUB connector may be plug either
on the female D-SUB connector 1 for the inputs 1 to 8 or to the female D-Sub connector 2
for the inputs 9 to 16. Each of the 8 female 1/4’’ jacks from the pigtail cable may be connec-
ted to male 1/4’’ jack cable from a sensor.
Additional pigtails are available thru eowave.
D-SUB 15 pigtail cable
To be connected to eo•body input 1-8 or 9-16
female 1/4“ jack
to connect to the sensors
III.2. Connect a sensor to eo•body