Eowave Eobody1 - Manual (Page 28)

28
Technical specifications • user’s manual
manual ©eowave/Ircam 2003
Technical specifications
Dimensions: Width 182 mm
Depth 128 mm
High 38 mm (knobs high excluded)
Weight: 580 g
Impedancy: 1 M Ω
Latency: around 200 µs by active in,
A/D conversion added excluding MIDI message
MIDI Message adds: 980 µs per control change without running status
Running status adds: 640 µs per control change (i.e. 1280 ms for a 10 bits send)
Optimise Running status up to 33%:
Keep it on the same MIDI channel (some latency is added by
changing MIDI channel). If you need different MIDI channels,
make sure to group your sensors as follow:
- Sensors 1 to 5, MIDI channel 3
- Sensors 6 to 14, MIDI channel 8
Power consumption: 25 mA under 9V DC, internal diameter of the plug: 2,5 mm
Thermic fuse: Polyswitch operating at 250 mA
CE norm & FCC INFORMATION
1. Important notice: do not modify this unit!
This product, when installed as indicated in the instructions contained in this manual, is
compatible with the CE norm & FCC requirements.
2. Important!
When connecting this product to accessories and/or another product, use only high quality
shielded cables. Cables supplied with this product must be used. Follow all installation ins-
tructions. Failure to follow instructions could void your FCC authorisation to use this product
in the USA.
Note: this product has been tested and found to comply with the requirements listed in FCC
Regulations, Part 15 for Class B digital devices & in The European Standard EN 50081-1 on
Electromagnetic Compatibility - Generic emission standard on residential, commercial and
light industry. Compliance with these requirements provides a reasonnable level of assuran-
ce that the use of this product in a residential environment will not result in harmful interfe-
rence with other electronic devices.