Cub Cadet ogst3305 - Manual (Page 15)

• Po si tion the fric tion wheel as sem bly up
onto the pin of the shift rod as
sem bly
and slide the shaft through the fric tion
wheel. See Fig ure 21.
• Slide the hex shaft into the hex I.D. of
the sprocket, the spacer and the left
ball bear ing and se cure wit h the
cupped washer and hex bolt.
• Re move plas tic film from gas cap.
NOTE: Make sure the pin from the
shift arm as sem bly is as sem bled to
the new fric tion wheel as sem bly.
CAUTION: Check engine and
snowthrower frequently for loose
nuts, bolts, etc. and keep these items
tightened.
STORAGE INSTRUCTIONS
NEVER STORE ENGINE WITH
FUEL IN TANK IN DOORS OR IN
EN CLOSED, POORLY VEN TI -
LATED EN CLO SURES, WHERE
FUEL FUMES MAY REACH AN
OPEN FLAME OR SPARK.
If unit is to be stored over 30 days, pre -
pare for stor
age as in structed in the
sep a rate en gine man ual packed with
your unit.
NOTE: Fail ure to com ply with sug -
gested
main te nance and
lu bri ca tion spec i fi ca tions will void
war ranty.
15