Cub Cadet J467 - Manual (Page 15)

15
Transporting Vehicle
IMPORTANT: Never tow the vehicle. Transmission
damage will occur if vehicle is towed. Haul the vehicle on
a heavy-duty trailer or on a full-size truck.
1. Once the utility vehicle is loaded onto the trailer or
truck, leave transaxle gearshift lever in forward or
reverse.
2. Apply parking brake during transport.
3. Fasten vehicle to trailer or truck with straps, chains, or
cables.
Operator Protective Structure
(OPS)
This utility vehicle is equipped with a Operator Protection
Structure (OPS) and seat belts. When used together
they are effective in reducing injuries to the operator in
the event of an accidental Operator. The safety provided
by the OPS is minimized if the seat belt is not properly
adjusted AND buckled. Refer to
Servicing Your Utility
Vehicle for seat belt adjustment.
4
Operating
Your
Utility
Vehicle
WARNING
WARNING: Always wear the seat belt
when operating the utility vehicle
equipped with a OPS. However, if the OPS
is not present or has been removed, the
seat belt must not be used.
Use the following guidelines when using a utility vehicle
equipped with a OPS:
1. Be aware of overhead clearances in the area of
operation. Check for clearance of door (or gate)
openings and other overhead objects such as utility
lines and tree branches. Overhead objects could
catch the OPS and upset the utility vehicle.
2. Do not modify the OPS by drilling holes for, or
welding accessories to the structure.
3. Do not use the OPS to pull objects with the utility
vehicle. Use ONLY the utility vehicle hitch for pulling.
4. In the event of an accident, have the OPS carefully
inspected and, if necessary, replaced by your Cub
Cadet dealer. Do not attempt to repair the OPS.
Always wear the seat
belt when operating
the utility vehicle
equipped with a OPS.
However, if the OPS
is not present or has
been removed, the seat
belt must not be used.
To help prevent
personal injury due
to loss of control or
tipping, always tow a
load slowly enough to
maintain control.