Cub Cadet J467 - Manual (Page 11)

11
WARNING: Always wear the seat belt
when operating the utility vehicle
equipped with a OPS. However, if
the OPS is not present or has been
removed, the seat belt must not be
used.
Adjustable Seat Lever
The adjustable seat lever is located beneath the driver’s
seat on the front side and it is used to move the seat
forward and backward. See Figure 3.
Slide the lever to the left and push the seat forward or
back to the desired position. Release the lever so that it
locks the seat in place.
WARNING: Make sure seat is in
locked position prior to operation and
do not try to adjust the seat position
while operating the vehicle.
Cargo Box Electric
Lift Switch
(Optional)
If equipped, the cargo box electric lift switch is located
on the right side of the dash panel. It activates lift to raise
and lower cargo box.
Rear Power Outlet Switch
(Optional)
If equipped, the rear power outlet switch is located on the
left side of the dash panel. It turns power on and off for
the rear outlet.
Cargo Box
The cargo box is raised by a gas spring. Manually remove
the contents of the cargo box before lifting the cargo box.
Pull up on the release latch located behind the driver’s
seat and lift up the cargo box. Once the cargo box is in
the raised position, access to the engine is possible. If
equipped with a electrical lift, the cargo box can be raised
to dump cargo. See Figure 4.
IMPORTANT: Do not exceed the vehicle’s Total Load
Capacity of 1,300 lb., which includes driver, passenger,
accessories, and cargo. Do not exceed 900 lbs. in the
cargo box.
Figure 4
3
Know
Your
Utility
Vehicle
Make sure seat is in
locked position prior
to operation and do
not try to adjust the
seat position while
operating the vehicle.
IMPORTANT:
Do not exceed the
vehicle’s Total Load
Capacity of 1,300 lb.,
which includes driver,
passenger, accesso-
ries, and cargo. Do not
exceed 900 lb. in
the cargo box.
WARNING