COP-USA DVRH264-E4 - Manual (Page 23)

423
5. SYSTEM MAINTAIN
Move the cursor to ǏSYSTEM MAINTAINǐ(Frame turns red means selected), and pressǏEnterǐ
to enter into system maintain setup interface.
AUTO RESET: When switch is on, you can setup the time for device to restart.
SYSTEM UPDATE: Copy the update file to the root directory of the thumb driver, and insert it
into USB 1.0, then press [Enter] to upgrade the firmware, and it will display the process of the
system upgrading, as following:
DEFAULT SETTINGS: Restore all the settings as the factory setting.
6. PTZ SETUP
Move the cursor toǏPTZ SETUPǐ˄Icon highlighted when selected˅ˈpressǏEnterǐto enter
into setting interface, you can setup the parameters for each channel separately.
CHANNEL:
The channel of PTZ connected.
PROTOCOL: select the protocol of different PTZ, there are two protocols to switch, and the default
is Pelco-D