COP-USA DVRH264-E4 - Manual (Page 21)

421
3. MOTION DETECT
Move the cursor toǏMOTION DETECTǐ˄Icon highlighted when selected˅ˈpressǏEnterǐto
enter into setting interface.
STATUS˖ Each channel has corresponding channel switch, press ǏEnterǐto turn on or turn off
the motion detection for each channel..
SNESITIVITY˖ each channel has corresponding sensitivity setting,including four standards
high,higher,medium and low, pressǏEnterǐkey to switch
MD AREA˖ each channel has corresponding regional motion detecting setting,move the cursor to
correspondingǏsettingǐˈpressǏEnterǐto enter regional setting interface, red area means it have
activated motion detection, transparent block means it have not activated motion detection.