COP-USA DVR2304SE-SL User Manual

Page 36

DVR User Manual

the trigger, you will not see the result of motion based alarm if no schedule is added.
If you have set the schedule for senor based recording in the same timeline, recordings can also be triggered.

4.5.3 Video Loss

Step1: Enter into Menu

ÆSetupÆAlarmÆVideo Loss tab. Refer to Fig 4-26:

Step2: The setup steps of video loss trigger are similar to alarm handling. You can refer
to Chapter 4.5.1 Sensor

Æalarm handling for more details.

Step3

: Click “apply” button to save the setting; click “exit” button to exit current

interface.

Fig 4-26 Video Loss

4.5.4 Other Alarm

This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event, Disk Attenuation or Disk Lost.
Step1: Enter into Menu

ÆSetupÆOther alarm interface. Refer to Fig 4-27:

Step 2: Use the dropdown menu and select the event or the alarm.
Step 3: Check the required trigger options.
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage
Alarm” to choose a threshold value for remaining HDD space. If the threshold value
is reached, the system will trigger the Disk Full Alarm.
Click “Apply” to save settings; Click “Exit” to exit the current interface

Fig 4-27 Other Alarm

4.5.5 Alarm Out