COP-USA DVR2304SE-SL User Manual

Page 30

DVR User Manual

Stamp

͵This provides an option to enable or disable the Camera Name and

the Time stamp on the video. You can also choose a position for the stamp
on the screen.
Step1: Enter into Menu

ÆSetupÆRecordÆStamp interface. Refer to Fig

4-14:
Step2: Checkmark camera name and time stamp; click Setting button. User
can use cursor to drag the camera name and time stamp at random
positions, referring to below Figures:
Step3: Select “All” to setup all channels with the same parameters.

Fig 4-14 Record Stamp Setup

Before Drag After Drag

4.3.5 Recycle Record

This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records
(FIFO, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows:
Step1: Enter into Menu

ÆSetupÆRecordÆRecycle Record tab.

Step2: Checkmark the ‘recycle record’ box to activate the auto recycling.
Step3: Click “apply” button to save the setting; click “exit” button to exit current interface.

Note: If the option is disabled or not selected, the DVR would stop recording once the HDD is full.