COP-USA DVRC264-16ME-A User Manual
Page 60
DVR User Manual
54
Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork
interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment
should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input
here 192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR). Click “
”button, the browser will
download Active X control as shown below:
Step 5: Click
icon and then select the Active X control, the welcome interface will be sh
own. Click “Continue””Install”