2poweringon, 2 powering on – COP-USA PKG-DVR04 User Manual

Page 13

Right click mouse

Right click mouse, popping the shortcut menu, as follows;

。

Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen

(16

road

playback),

twenty

four

picture,thirty

two

picture,

broadcast control switch view show or hide broadcast control bar.

Double

click

left

button

To run the ActiveX Control ActiveX special operation, For example, double click

the certain item of record listed file, then the system will playback the segment

record video.

Dragging the mouse

Depress the left key and dragging the mouse, banding select Motion detection

area, depress right key of mouse and Dragging, cancel the banding select area.

Dragging playback ProgressBar back and forth to dolly moves, to achieve the

playback position adjustment. Dragging the audio and video regulation

parameter bar dolly moves, to achieve the parameter adjustment.

3.2

3.2 Powering

Powering

Powering On

Boot-strap

If【POWER】pilot lamp off, please follow the operation step by step:

First step: if the power does not plug into, please plug into the power, then the DVR

begin to start, by now, if the

DVR still inactive, to enter the next step;

Second step: turn on the power supply of the DVR

at the back panel, DVR begins to start.

If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR

begins to start.

The video output mode of DVR ’s the default setting is multi picture channel mode after starting the DVR , if the

time of start the DVR

is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording

function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.

Button

Description

Button

Description