COP-USA CD54W-35Y - Manual (Page 9)

Operation Manual for Intelligent Speed Dome Camera
8
9. Install the aluminum alloy ball on the bracket
(
Figure 12
)
.
10. Rotate the vitreous cover clockwise and mount it
（
Figure 13
）
.
Cl ose
Figure 12 Figure 13
11. Connect the control wires of the system as per Figure 14.
RED CONNECTOR
( POWER I N)
BLACK CONNECTOR
( RS485 CONTROL I N)
VI DEO OUT
RED LI NE( AC24V I N)
BLACK LI NE( AC24V I N)
ORANGE LI NE( RS485+)
YELLOW LI NE( RS485- )
Figure 14
3. To ensure a smooth and successful installation, you must:
1.
Have electrical work comply with latest national electrical code, national fire code,
and all applicable local codes and ordinances.
2.
Coordinate work with other trades to avoid interference.
3.
Verify existing site conditions and coordinate with owner’s representative and
appropriate utilities as required.
4.
Obtain copies of all related plans, specifications, shop drawings and addenda to
schedule and coordinate related work
5.
Thoroughly review the project to ensure that all work meets or exceeds the above
requirements. Bring alleged discrepancies to the attention of the CCTV Project
Coordinator.
Ⅴ
. Technical data table
1
、 Indoor/Outdoor Speed Dome