COP-USA CD75IP - Manual (Page 36)

Network Video Server/IP Camera User Manual
36
Video loss warning Setting
Steps of setting:
Step I: Select『Channel』, enter『Alarm Type』, then select 『Video Loss』
Step II: Set the alarm time segment, select arming time and set the arming time segment
Step III: Tick and select『Linkage Alarm Output』
The system offers binary probe output for options; users may connect with external
alarm equipment e.g. alarm ring, alarm light, alarm signal, etc. In case an
emergency of video loss occurs, the system may automatically output binary to the
external equipment
Step IV: Set the time of alarm elimination (1~999 seconds)
Step V: Click『Setting』, save the parameters
4.9. Warning Output Setting
The chief function of warning output is to automatically trigger the designated probe output binary
when a warning occurs, thus to trigger the warning equipment e.g. alarm, etc. You can also