COP-USA CC25NVD-H - Manual (Page 6)

6. PRIVACY
7. SETUP
MASK (1~8)
This camera has up to 8 masking areas. These 8 Masking Areas can be setup anywhere in the screen.
and each mask can be enabled or disabled anytime.
MODE (ON/OFF)
Title: (ON/OFF)
If you choose to have a User Title, change this option to On, then select it.
This will allow you to manually insert a title by selecting each individual character.
This simply displays the title of the camera title up on the screen
Manual DPC (Dead Pixel Compensation ‐ OFF/MANUAL)
This feature tells the camera to compensate for any dead pixels by filling that dead pixel in with a nearby pixels
color. Normally this should not ever be a problem and you can leave this off, but if it
is, we recommend using the Auto Method below as opposed to this manual setting.
WHITE THR (1~255) AdjustWhite Threshold
BLACK THR (1~255) Adjust Black Threshold
DPC LEVEL (1~255) Controls the DPC levels
AUTO DPC‐ (This Feature fills the dead pixels automatically, but if there's no dead pixels, leave it OFF)
DPC LEVEL(1~30) Select the intensity of the dead pixel correction .
DPC RUN It Automatically compensates for the dead pixels, to use this feature, cover the camera with hands or anything that blocks light and push the enter to
run the DPC.
OLPF (optical low pass filter) ‐ This feature is used if you choose to use different filters over the lens. Since this lens is fixed, changing this value will have no effect
on the picture.
Monitor (Choose the monitor Type used ) (CRT or LCD)
Gamma (0.20~1.00)
Gamma is an electronic correction carried out by the camera circuitry to balance the brightness seen by the camera to that of the monitor. Normally .45 is the best