COP-USA CC25NVD-H - Manual (Page 4)

3. DAY & NIGHT
MODE:
AUTO (BURST /DAY>NIGHT/NIGHT>DAY/DWELL
TIME)
Camera switches from Color to B/W depending on
the illumination of the scene.
COLOR
Stays on DAY mode and Color
B&W
Stays on Night mode and B/W
BURST:
ON
When this is selected, a COLOR ‐ B/W picture will be
shown .This will increase the noise .
OFF
When this is Selected a true B/W picture will be
shown on screen no hints of color.
DAY/NIGHT (007~030)
This Option sets the brightness level which will
determine when to switch from DAY to NIGHT mode.
EXT: (This requires the use of an external mechanism and cannot
be used
on this camera.)
BURST (ON/OFF)
ON
When this is selected, a COLOR ‐ B/W picture will be shown .This
will increase the noise .
OFF
When this is Selected a true B/W picture will be shown on
hi t f l
C‐SUP and A‐SUP:(000~100) Default is 40.
Use these settings to reduce the color or aperture settings.
For this function to work, the 3D DNR must be OFF.
The Higher the number, the higher is the supression.
EXT.
Camera switches from Color to B/W depending on
the illumination of the scene. NIGHT/DAY (006~029)
This Option sets the brightness level which will
determine when to switch from NIGHT to DAY mode.
DWELL TIME:(000~015)
This Function controls the switching time between
DAY mode to NIGHT mode, and From NIGHT mode to
DAY mode.
screen no hints of color.
DAY/NIGHT (000~255)
This Option sets the brightness level which will determine when
to switch from DAY to NIGHT mode.
NIGHT/DAY (000~255)
This Option sets the brightness level which will determine when
to switch from NIGHT to DAY mode.
SMART IR (AUTO/OFF)
It automatically adjust the infrared light required in a scene as the
subject moves closer to or further away from the camera,
resulting in a clear image that is not washed out or too dark.
DWELL TIME:(000~015)
This Function controls the switching time between DAY mode to