COP-USA CG32WD - Manual (Page 3)

4 5
5. EXPOSURE
6. DAY / NIGHT
(1) AGC (Auto Gain Control)
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 20dB.
(
Default)
- MIDDLE: Allows automatic gain control from 0 to 30dB.
- HIGH: Allows automatic gain control from 0 to 42dB.
The higher the gain level, the brighter the screen becomes
while the higher the noise as well.
ON : Adjustable SENS-UP level between x2 ~ x512.
OFF: SENS-UP is disabled.
Default setting is
It is used to improve the sensitivity and clarity of picture
quality at low light
- DAY : The image is always displayed in color.
- NIGHT : The image is always displayed in black and white.
- AUTO1 : The image is automatically converted to B/W from
Color at 3 lux.
● IR WDR LEVEL : Select Anti - IR saturation level among
OFF/LOW/MIDDLE/HIGH
● IR WDR ADJUST : Adjust the value in each of selected
level - 0 ~ 6
(2) SHUTTER
A. AUTO : The shutter speed is controlled automatically.
(
Default)
B. FLK : Please select FLK mode when flickering occurs on
the screen, due to an imbalance between
illumination and frequency.
C. FIXED : The shutter speed is controlled manually.
- You can select the speed from ‘1/60’ to ‘1/90,000 sec.
(NTSC), ‘1/50’ to ‘1/90,000 sec. (PAL).
- You can select Digital Slow Shutter. (DSS) between
x2 ~ x512.
Please use FIXED mode only when the light level of the
surveillance area is fixed all the time.
(3) SENS-UP
- Low light sensitivity is greatly improved with the use of this
function.
- Low light sensitivity level is adjustable from 2 to 512 times.
- When SEN-UP level is higher, the picture becomes brighter
while noise is increased at the same rate of SENS-UP.
Note
• When the SHUTTER is set to MANUAL mode, SENS-UP does not operate.
• When the AGC is set to OFF, SENS-UP does not operate.
(4) INITIAL SET
Initialize all settings of EXPOSURE menu.
(5) SAVE
Save the settings
Please move the cursor onto ’POS’ and then press the button.
The name will appear at the top left hand corner.
Please find the position you wish to display the name by using the 4 directional
selections, and then press the Button.
- Please select ‘END’ and then press the Button to complete CAM NAME input.
- BRIGHTNESS: adjust the brightness of screen when the
environment is extremely bright or dark.
- REACTION: Reaction speed of the shutter is adjustable.
It is useful when the light condition of the environment keeps
changing quickly.
3. Save
Press SAVE to finish all settings and return to
୛ This camera only accepts Manual lens mode.
1. Please select the lens mode to MANUAL.
2. Press the Tact SW to enter the .
4. LENS
1. CAM NAME
2. LENS
3. EXPOSURE
4. DAY/NIGHT
5. WDR/BLC/ECLPS
6.WHITE BAL
7. 3D-DNR
8.EFFECTS
9.SPECIAL
10.EXIT OFF
MANUAL
AUTO
WDR
ATW
ON
RET
BRIGHTNESS
REACTION SPEED
SAVE 50......|.....
8.|..........
1. CAM NAME
2. LENS
3. EXPOSURE
4. DAY/NIGHT
5. WDR/BLC/ECLPS
6.WHITE BAL
7. 3D-DNR
8.EFFECTS
9.SPECIAL
10.EXIT OFF
MANUAL
AUTO
WDR
ATW
ON
RET
>IR WDR LEVEL
IR WDR ADJUST HIGH
3....|........