Start-up, Ower on, Power off – ChemoMetec NC-250 User Manual
Page 27: 4 start-up
4 Start-up
991-0251 Rev. 1.0
Feb-2013
11
4 Start-up
4.1
Power on, power off
On the rear of the instrument two plugs and one fuse holder are located. When seen from
the rear the USB 2.0 port is to the left and the fuse holder and DC Power Plug is at the
right. The NucleoCounter® NC-250™ is powered by a 24VDC external power supply. To
connect the power supply to the NucleoCounter®, connect it to the DC Power Plug (see
Figure 4), and plug the mains power cord of the power supply into a wall outlet.
Figure 4. Rear side of the NucleoCounter® NC-250™
The NucleoCounter® NC-250™ can now be turned On once the wall outlet is On. To power
it Off, either remove the DC Power Plug or turn the wall outlet Off.
Figure 5. USB 2.0
Figure 6. DC Power Plug