Canon LV-7325U - Manual (Page 16)

POWER
NORMAL MENU MODE AUTO IMAGE
FOCUS ZOOM
VOLUME PAGE
LAMP
REPLACE
WARNING
TEMP. READY LAMP
WIDE
TELE
SELECT
BRIGHT
16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close the
MENU operation.
(P17, 19)
MENU BUTTON
AUTO IMAGE BUTTON
READY INDICATOR
POWER ON–OFF BUTTON
WARNING TEMP. INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR
Used to operate AUTO
IMAGE function. (P28)
This indicator is lit in green
when the projector is ready
to be turned on. This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode. This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P43) This indicator flashes red
when internal projector
temperature is too high.
(P42)
Used to turn the projector
on or off. (P20)
Used to select zoom adjust.
(P21)
MODE BUTTON
SELECT BUTTON
FOCUS BUTTONS
NORMAL BUTTON
VOLUME BUTTON
POINT BUTTONS
Used to select input source
among Computer, Video or
MCI. (P23, 30)
Used to select focus adjust.
(P21)
Used to adjust volume.
(P22)
Used to reset to normal
picture adjustment preset
by factory. (P27, 31, 36)
Used to select an item and
adjust the value on the
MENU. It is also used to
pan the image in DIGITAL
ZOOM mode. (P29, 37)
Used to execute the item
selected. It is also used to
expand the image in
DIGITAL ZOOM mode.
(P29, 37)
ZOOM BUTTONS
PAGE BUTTON
Used to move to the next /
previous page of the data in
the memory card plugged
into PC CARD SLOT.
Page buttons are activated
in MCI mode (P34).
BRIGHT SWITCH INDICATOR
This indicator lights when
the BRIGHT SWITCH is set
to BRIGHTER. (P22)