Clarion DXZ546MP - Manual (Page 13)

280-8009-00
DXZ546MP
17
English
CD/MP3/WMA Operations
CAUTION
If there is no disc loaded, the indication “ NO
DISC ” appears in the title display.
∗ The mode changes each time the [FNC] button is
pressed. (Modes are not displayed for equipment
that is not connected.)
Set to MP3/WMA
Disc
Mixed with CD and
MP3/WMA type tracks
CD type track only
MP3/WMA type track only
Set to CD
Play CD
Play MP3/WMA
Setting
Play CD Play CD
Play MP3/WMA
Play MP3/WMA
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert for-
eign objects into the slot.
• Do not insert discs where adhesive comes out
from cellophane tape or a rental CD label, or
discs with marks where cellophane tape or
rental CD labels were removed. It may be im-
possible to extract these discs from the unit
and they may cause the unit to break down.
Backup Eject function
Just pressing the [ Q] button ejects the disc even
if the power to the unit was not turned on.
Press the [ Q] button, then the CD will be ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded
after 15 seconds. However, single CDs will not be
reloaded, so make sure to remove them.
Listening to a disc already loaded
in the unit
Press the [FNC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
Loading a CD
Insert the disc into the CD insertion slot with its la-
beled side facing up, then the CD will start playing.
For 5-inch (12 cm) CD For 3-inch (8 cm) single CD
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion slot.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [ ] button
again.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes in the following order:
Radio CD/MP3/WMA
(CD changer)
(DVD changer) AUX (TV)
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
03.12.26, 4:48 PM Page 17