BUCHI Cartridge C-670 - Manual (Page 3)

BÜCHI Cartridger TM C-670
1
Table of contents
Table of contents
en, Version C (22 pages) Order no.
C-670 Operating instructions 96946
1 Delivery package 2
2 Safety 3
3 Function 6
3.1 Principle of the packing process 6
3.2 Area of usage 6
4 Putting into operation 7
4.1 Location 7
4.2 Connecting to the vacuum tube to 7
the cartridge holder
4.3 Connecting the Cartridger to a vacuum source 8
4.4 Connecting the Cartridger to a compressed air or 8
gas supply
5 Operation 9
5.1 Checking the suction output 9
5.2 Overview of packing process 9
5.2.1 Selecting the stationary phase 11
5.2.2 Filling the stationary phase 11
5.2.3 Fluidization of the stationary phase 11
5.2.4 Inserting the first (lower) frit 12
5.2.5 Screwing in the cartridge 13
5.2.6 Packing the cartridge 13
5.2.7 Inserting the second (upper) frit 14
5.2.8 Removing the packed cartridge 14
5.3 Storing cartridges 14
5.4 Changing the stationary phase 14
5.5 After finishing work 15
6 Maintenance 16
6.1 Cleaning the device 16
6.2 Replacing the safety frits 16
6.3 Customer service 17
7 Taking out of operation 18
7.1 Storage/transport 18
7.2 Disposal 18
8 Replacement parts and accessories 19
8.1 Replacement parts and accessories 19
8.2 Cartridges 20
9 Appendix 21
9.1 Technical data 21
9.2 Materials used 21
9.3 EU declaration of conformity 22
Please be sure to read these operating in-
structions thoroughly before using the BÜCHI
Cartridger
TM C-670. Keep these instructions
in the immediate proximity of the device so
that it is accessible at all times.
Chapter 2 contains important safety
instructions. Their observance is absolutely
necessary for safe operation of the device.
Technical changes may be carried out without prior notice. No
part of these operating instructions may be reproduced in any
form or processed, multiplied or distributed using electronic or
optical systems without the written permission of Büchi Labor-
technik AG. All rights reserved.
Copyright © Büchi Labortechnik AG 2003