BUCHI Recirculating Chiller F-125 - Manual (Page 18)

6 Operation
18 F-125 Manual, Version B
Display
1
3
4
2
1 Set temperature of Recirculating Chiller in °C
2 Actual temperature of Recirculating Chiller in °C
3 Active cooling is indicated by the snow flake
4 If the Recirculating Chiller is connected with the
BUCHI vacuum controller the connection symbol
is displayed
Level indicator
2
3
1
1 Lower black line: minimum filling level
2 Upper black line: maximum filling level
3 The floating ball: indicates the actual filling level
of cooling liquid
Rear side
L
8 9
J
K
1
2 3 4 5 67 1 Slots for air flow out
2 Main cooling medium flow IN
3 Main cooling medium flow OUT
4 Filling connection for cooling medium
5 RS-485 connection to connect Chiller
to the Rotavapor ® R-220 SE
6 Resettable fuse
7 Resettable fuse
8 Power cable (to be installed by an
electrician or equivalent specialist)
9 Rotavapor ® guidances to install
System in the right position.
J Cooling medium flow IN / OUT for
second condenser (bypass it when no
second condenser is installed)
K Output socket i.e. for vacuum pumps
such as BUCHI model V-710
L Wheels (not lockable)