BUCHI Rotavapo R-250 - Manual (Page 9)

9
Rotavapor R-250 4 Putting into Operation
4 Putting into Operation
The danger zone around the Rotavapor R-250 can extend
outward by up to 10 m. When working inside this danger
zone, there is a risk of damaging the glass parts, which could
cause them to implode.
4.1 Installation Location
Always set the unit up on a clean, stable, and flat surface.
Never at a location where there is a great deal of personal
traffic (breaking or broken glass) !
The ambient temperature must be between 5° and 40°C.
The dimensions of the rotary evaporator are:
Height
- Reflux 2.45 m
- Bullfrog Reflux 2.10 m
- Descending 2.30 m
Width 1.40 m
Depth
- Single receiver 0.80 m
- Interchangeable receiver 0.85 m
4.2 Unpacking
Take care not to break the glass when opening cartons that
contain glassware.
Look for any damage after unpacking. It is important that
any damage in transit be identified right when unpacking. If
nec essary, make an immediate assessment of the situation
(Notify the post office, the railroad, or the shipping company
involved).
Save the original packing for possible transport at a later date.
The transportation security between bath and housing has
to be taken away befor using the bath lift.