BUCHI Glass Oven B-585 Kugelrohr User Manual
Page 17
15
Glass Oven B-585
5.2.7 Operation of the B-585 in the program mode
Fundamental arrangement of the display:
a Information about the active mode and current stage of
the program (I, II or III)
b Operating condition
c Actual temperature
d Temperature unit of measurement
e Graphical heating display
f Indication of the remaining time to the end of the program
g Indication of the remaining time in the current program
step
Program load, edit select, delete, view:
By turning the Multifunction button, the display will change to
the working menu. By choosing the menu ”program” existing
programs can be checked, deleted or modified.
To load an existing program, turn the Multifunction button to
load and confirm it by pressing the button. The cursor will
jump to the next selection. By turning the buton again the
stored programs are shown (P01, P02...) . By pressing the
button, the chosen program will be confirmed. Now it shows
the working display. To start the chosen program press the
green button start.
5.2.8 Change or create a program:
If the cursor is on position change/new, a new program can
be built or an existing program can be changed.
By confirming choose the cursor will get to the existing pro-
grams. (P01, P03, new.....).
After choosing the program the cursor jumps to step1. Press-
ing the Multifunction button allows the user to change the
temperature or time. The cursor jumps to the temperature
display. It is now possible to make any desired changes.
Press the button to enter the chosen temperature and the
cursor will then jump to the time display. Continue accord-
ingly as for the temperature setting.
If a new program is created, an empty memory positions
are will be offered. If all of the 10 memory position
occupied, then an existing program must be either
edited and saved to store the desired parameters,
or one must be deleted before a new program can
be created and stored.
At any time, even during a run, any program stored in me-
mory (apart from the one currently loaded), can be edited or
deleted. New programs can also be created.
5 Operation
b
c
e
d
f
g
a