Brookfield BF35 - Manual (Page 13)

Brookfield Engineering Labs., Inc. Page 13 Manual No. M13-10000
Caution - Risk of Danger: This equipment produces sound pressure in excess
of 85 dBA. Protective measures (such as hearing protection, noise-reducing
baffles, or a hood) should be considered.
Equipment Operation
Caution - Risk of Danger: The (13 - 16 VDC) power cord and the DC inlet are
the emergency disconnect devices. Do not position the equipment such that it is
difficult to operate the emergency disconnect devices.
Caution - Risk of Danger: In normal operation, this equipment may liberate the
potentially poisonous gasses listed below. However, the list below is dependent
upon the chemical makeup of the sample fluids presented for testing. Care should
be taken to ensure that: no unexpected or anomalous chemicals are contained
or added to the test samples; the test environment is adequately ventilated; and,
when necessary, appropriate personal protective equipment is employed.
-
Hydrogen Sulfide (H
2
S)
- Methane (CH
4
)
- Carbon Dioxide (CO
2
)
- Sulfur Dioxide (SO
2
)
Caution - Risk of Danger: The samples presented for testing may contain
flammable substances. The following risk-reduction procedures must be followed
to ensure the safe operation of the equipment.
- Always use in a well-ventilated area.
-
Keep away from open flames.
Caution - Risk of Danger: If this equipment is operated in a manner not specified
by the manufacturer (Brookfield), the protections provided by the equipment
may be impaired.
Caution - Risk of Danger: This equipment may operate unexpectedly if the
equipment is energized when the Speed Selector Knob and Power (On/Off) Switch
are left in the “On” position. Care should be taken to ensure both switches are in
the “Off” position prior to energizing the equipment. Also, care should be taken
to ensure that the Speed Selector Knob is in the “Off” position prior to turning
the Power (On/Off) Switch to the “On” position.
Speed Selector Knob