Citizen Systems Citizen CT-S4000 - Manual (Page 30)

— 27 —
Switch No. Setting Default Set Values
Memory SW7-1 Baud Rate 19200 bps/ 1200 bps, 2400 bps, 4800 bps, 9600 bps,
9600 bps** 19200 bps, 38400 bps, 57600 bps, 115200 bps
SW7-2 Data Length 8Bits 7Bits, 8Bits
SW7-3 Stop Bit 1Bit 1Bit, 2Bits
SW7-4 Parity NONE NONE, EVEN, ODD
SW7-5 Flow Control DTR/DSR DTR/DSR, XON/XOFF
SW7-6 DMA Control Valid Valid, Invalid
SW7-7 VCom Protocol PC Setting PC Setting, DTR/DSR, XON/XOFF
Memory SW8-1 Print Width 832dots 832dots(69 col.), 720dots(60col.), 660dots(55col),
576dots(48col.), 512dots(42col)
SW8-2 Paper Type 1 Color Normal 1 Color Normal, 2 Color Normal
Memory SW9-1 Code Page PC437 PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/PC864/
Thai Code 18
Memory SW9-2 Int'Char Set USA USA, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea
Croatia, China
Memory SW9-3* Kanji OFF ON, OFF
SW9-4* JIS/Shift JIS JIS JIS, Shift JIS
Memory SW10-1 Print Density 100% 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
SW10-2 Print Speed Level 9 Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
SW10-3 ACK Timing Before Busy Before Busy, Same Period, After Busy
SW10-4 NV User 192K bytes 1K bytes, 64K bytes, 128K bytes, 192K bytes
SW10-5 NV Graphic 384K bytes 0 byte, 64K bytes, 128K bytes, 192K bytes,
256K bytes, 320K bytes, 384K bytes
* In this printer, Memory Switches 9-3 and 9-4 are not usable.
** For USA version.
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of
three actions: pressing the FEED button, pressing and holding the FEED button,
and opening or closing the printer cover.
1. Entering memory switch setting mode.
Set paper in the printer and keep the printer cover open. With the FEED
button pressed and held, turn the printer power on, and then press the
FEED button twice. Close the cover. If the current settings of the memory
switch etc. are printed, the printer is now in the memory switch setting
mode.
Memory SW (1) 00000000
0: OFF state
1: ON state
(No indication for 0/1 with memory switch SW7 through SW10)