Audio Damage Tattoo - Manual (Page 11)

11
1x16T 1/16 th triplet 24
1x16 1/16 th 16
1x8T 1/8 th triplet 12
Channel Controls
The Channel Controls create random variations for each instrument. Each instrument has its own set of
channel controls. Click the name of an instrument in the list on the left of the pattern grid to choose which
instrument is affected by the channel controls. The current instrument’s name is shown in bright white while
the other names are shown in grey.
Channel controls are stored within the pattern memories. When you change patterns the channel controls
change also. This lets you create similar patterns with variations created by different settings of the channel
controls.
Clear
The Clear button erases all of the notes for the current instrument. Of course you can also erase notes by
clicking and dragging back and forth in the pattern grid, but the Clear button does it all for you with one click.
Rand
Click the Rand button to randomly turn notes on and off for the current instrument. Each time you click the
Rand button, about half of the notes in the current instrument’s pattern will be turned on and about half will
be turned off.
RND RST
“ RND RST ” is an abbreviation for “randomize on reset”. When an instrument’s RND RST switch is turned on,
the instrument’s notes are randomized every time Tattoo reaches the beginning of the pattern. RND RST
creates the same result as if you clicked the Rand button exactly at the beginning of each measure as Tattoo
plays.