Analogue Solutions Oberkorn sequencer - Manual (Page 25)

Oberkorn User Manual
Analogue Solutions | Some Patch Examples 25
SOME PATCH EXAMPLES
No hard and fast rules. Just do what works and what is fun.
OTHER MAD THINGS TO TRY;
Patch a pitch CV output (A, B or C) into clock CV input.
Patch a gate output into either b0, b1, b2, or b3 setting inputs.
SYNC’ING TWO OBERKORNS
Take clock Out of first Oberkorn to clock In of second Oberkorn. Second Oberkorn run/stop
switch should be set to EXT.
SYNC’ING TWO OBERKORNS WITH DIFFERENT RELATIVE SPEEDS
Or you could use one of the b0-b3 setting input/output sockets as a sync signal for the
second Oberkorn. This way the second Oberkorn will run at half speed (or quarter speed,
etc.).