360 Systems Instant Replay 2 - Manual (Page 34)

34
Connecting to Instant Replay using a DOS Client.
1. From a Windows XP or Windows 2K environment, open a DOS Shell as follows.
START->All Programs->Accessories->Command Prompt
From the command prompt, type
ftp
…where the IP ADDRESS is the address you set your Instant Replay to in the Initial Setup step.
For example 192.168.1.120 would be a valid entry. The display will do the “dots” for you.
2. Type in USER ID when Prompted.
3. Type in the PASSWORD when prompted.
Downloading a file from Instant Replay to your host:
Log in per the example above. Type:
Get
At the FTP prompt: