ConnectPRO MIT-CAT5 8 - Manual (Page 10)

12. Resetting the Switch
To reset the Switch press the 2 front panel Select buttons simultaneously. The CIMs are unaffected
by this reset.
Resetting can also be performed through the software – explained later.
13. Rack mounting the CAT5 KVM
Use the L-shaped brackets and screws provided to mount the CAT5 KVM on a server rack as
illustrated below.
14. Rack mounting the CIMs
You can attach the CIMs to a server rack or computer using the Velcro strips provided. Or connect
it using the bracket provided.
The figure below illustrates the bracket.
15. Operating the CAT5 KVM system