Culligan Aqua-Cleer - Manual (Page 4)

2
System Specifications
System Flow Sequence ........................................Particle Filter, Activated Carbon Filter,
...........................................................Reverse Osmosis Membrane Filter, Storage Tank,
...........................................................Polishing Filter, Dispensing Faucet
Particle Filter .........................................................5 Micron Spun Polypropylene
Activated Carbon Filter.......................................Solid Carbon Block
Reverse Osmosis Membrane Filter ...................Culligan
®
Aqua-Cleer
®
Thin Film Composite
System Daily Production Rate to
Pressurized Storage Tank ....................................9.6 gpd (36.3L) (3 gallon)
Product Production Rate without storage
tank to atmosphere
1 - H-30 S-R Models.........30 gpd (114 L/day)
Ratio of Product to Flush Flow 2
Soft Water Applications ................2:3 3
Hard Water Applications ..............1:3 - 1:5
Polishing Filter ......................................................Cullar G Activated Carbon
Dispensing Faucet ................................................Culligan Aqua-Cleer Faucet Rotary Operation,
Stainless Steel and Resin Flow Passages, with
Built-in Siphon Break
Colors ..............................................Polished Chrome or White
Storage Capacity Tank .........................................3 gallons
Dimensions - Filter Assembly ............................7"W x 4.3"D x 16.3"H
- Storage Tank ................................9" Diameter x 14"H
1 Rating at 50 psi, 77°F, 500 mg/L TDS Influent, Without Storage Tank to atmosphere. This is a factory
specification for membrane production. Actual production rate and TDS rejection will depend on
temperature, water pressure, TDS level, membrane variation and usage pattern.
2 May vary with pressure. See Technical Manual for all hard water applications and applications where
TDS exceeds 1000 mg/L (ppm).
3 Except nitrate models.