Reparation, Warnings, Before getting – CatEye EC-T220 User Manual

Page 11: Treadmill

I L

STO

INC

LIN

REPARATION

AND

WARNINGS

BEFORE

GETTING

THE

TREADMILL

Warning

Be sure to securely stop the running belt by pressing either the EMERGENCY button or STOP button

before you step up on the EC-T220.

1. Grip the handle securely until you are comfortable

on the EC-T220.

2. When you are accustomed to exercise with EC-

T220, you may exercise free from the handle,
swinging your arms freely and naturally at your
side.

3. Keep your track on the center part of the running

tread.

Caution:

While exercising, stepping on any
part other than the running belt may
cause you to fall.

4. After a few seconds of exercise, the running belt

speed will become faster.

5. Keep your running within a distance where you

can still reach the EMERGENCY STOP or STOP
button and operate the treadmill.

Caution:

Stay in the center part of running
belt area for safest operation. Slow
down or stop your exercise immedi-
ately if you are unable to keep up
with the belt speed.

Safety Key Function

The card slot of this machine functions as a safety key when you change the setting of
dip switch in the control unit.
Removing the safety key from the card slot will stop the treadmill as will pushing the
emergency stop button.
The LCD screen lights up and then the program starts only when the safety key or card
is inserted into the slot while the safety key function is activated. This allows you to use
the function to prevent tampering.
For further information relating to the procedures for how to set the safety key func-
tion, refer to "Setting the Safety Key Function" in page 39 of the "Reference Guide"

Reference:

The program will be initiated when a key is inserted to the card slot, and
you can use the data card as a key to initiate the program.

Caution:

For your safety, attach the clip end of the cable from the safety key to
your clothes.

How to Use the Safety Key
(How to start the program when the safety key function is
activated.)

1. Attach the clip end of the cable from the safety key to your clothes.

Caution:

Check that the safety key will come out of the card slot when your
body is away from the control unit.

Reference:

When the data card is to be used as a safety key, fix the card to the
cable.

2. Insert the safety key to the card slot.
3. Following the instructions on the screen, select the training program, set necessary

conditions, and start your training.

Reference:

The LCD screen lights up only when the safety key or card is inserted
into the slot while the safety key function is activated.

Clip

Safety key