Headphone, House, booth and tone controls – SoundCraft 1620LE User Manual
Page 24
24
HEADPHONE
The headphone circuit is designed as a cue and monitoring circuit. With the CUE/PGM switch in the PGM position, the program signal
is fed to the headphones. With the switch in the CUE position, the signal feed is taken from before the individual input level controls.
A six position selector switch determines which input will be heard. When cueing, be certain that the level control for that input is
completely off, to avoid cueing through the house system.
HOUSE, BOOTH AND TONE CONTROLS
The house master affects the level of the house output, and the booth master affects the level of the booth output. The tone controls
are separate for left and right channels and are shelving types, with a nominal cut or boost of 10 dB maximum at 50 Hz and 10 kHz.