SoundCraft 1620LE - Manual (Page 16)

16
INSPECTION AND INSTALLATION
UNPACKING AND INSPECTION
Your Model 1620LE was carefully packed at the factory, and the container was designed to protect the unit from rough handling.
Nevertheless, we recommend careful examination of the shipping carton and its contents for any sign of physical damage which could
have occurred in transit.
If damage is evident, do not destroy any of the packing material or the carton, and immediately notify the carrier of a possible claim for
damage. Shipping claims must be made by the consignee.
The carton should contain:
Model 1620LE Music Mixer.
Mains Cable
UREI Instruction Manual (this book).
Warranty Card (Model 1620LE – the serial number tag is on the rear panel of the Mixer).
Spare Fuses
ENVIRONMENTAL CONSIDERATIONS
The 1620LE Mixer will operate satisfactorily over a range of ambient temperatures from 0 C to +50C (+32F to +122F), and up to 80%
non-condensing relative humidity.
If the system is installed in an equipment rack, console or desk with high heat producing equipment (such as power amplifiers),
adequate ventilation should be provided in order to assure longest component life. Also, while circuitry susceptible to hum pickup is
sufficiently shielded from moderate electromagnetic fields, installation should be planned to avoid mounting the system immediately
adjacent to large power transformers, motors, etc
POWERING
The 1620LE may be operated from either 100-125 V AC or 200-250V AC mains (50-60 Hz, single phase). As indicated below, the
nominal line voltage may be selected with a rear panel switch. BE SURE TO VERIFY BOTH THE ACTUAL LINE VOLTAGE AND THE
SETTING OF THE VOLTAGE SELECTOR SWITCH BEFORE CONNECTING THE 1620LE TO THE MAINS.