To operate cleaner, Power cord, On/off switch – Panasonic QUICKDRAW MC-V5117 User Manual
Page 9: Handle adjustments, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO OPERATE CLEANER
A
CAUTION
Do not use outlets above counters Damage to items m the surrounding areas
could occur Be sure the switch is in the off position while plugging the cord in.
POWER CORD
NOTE To reduce the nsk of electrical shock, this vacuum has a polanzed plug, (one blade is wider
than the other) This plug will fit in a polanzed outlet only one way If the plug does not fit fully in tfie
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install №e proper outiet
DO NOT CHANGE THE PLUG IN ANY WAY
ON/OFF SWITCH
1 Plug the power cord into a 120V outlet
To stop the vacuum cleaner, push the
switch on the top of the dust compartment
to the OFF position
2 To start the vacuum cleaner, push the v
OFF ON
switch on the top of the dust compartment
\
/---------------
to the ON position \
IXLJ
HANDLE ADJUSTMENTS
The handle may be lowered
to any position required Just
step on the area as indicated
by the Illustration and
tower the handle as
desired
1 Upright position
The handle locks in this
position for storage
The handle should
always be in an
upnght positon when
the cleaning tools
are used
2 Middle position
This position is for
normal cleaning
3 Low position
This position
IS used for
cleaning
under
furniture
- 9 -