Open the center speaker, Panel angle (tilt), Open/close the front panel – Panasonic CQDRX900U User Manual

Page 11: Display change

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Because the following oprations are not functioned with a remote control, use main unit buttons.

Open the

Center Speaker

Open; Press r/^1.

Close: Press again.

Note:

The center speaker can not be opened or closed

while the front panel is opened completely.

Panel Angle (Tilt)--------------------------

Press and hold

[OPEN]

(TILT) for more than 1 second

until signal sound is heard, then release.

Each time the button is pressed for 1 second and

release it, the panel angle is changed (in 3 steps).

Open/Close the Front Panel

• Press

[OPEN]

to open the front panel.

Note:

If nothing is changed for 20 seconds, the original panel

position will be recovered.

• To close the front panel completely, press

[OPEN]

again.

• To recover the original panel position, press

[OPEN]

again

and hold it for more than 1 second, then release.

Notes:

• When the ignition switch is turned OFF, the panel

and the center speaker are closed.

• When the ignition switch is turned ON, the panel and the

center speaker are open to secure their former positions.

Tiltl

Tilt 2

Tilts

Display Change

Press

[DISP]

to change the dispay.

When the power is on

(Example: CD Player mode)

When the power is off

Regula^Display

Dot Spectrum Analyzer Display

Clock Time Display

No Display

Clock Time Display

Note:

Displays differ from each source mode.

CQ-DRX900U