Common procedures, 1 press [setup] to show the menus, Press [m, to select the menu’s tab – Panasonic DVD-RP62 User Manual
Page 17: Entering a password (ratings), Digital output, Press [setup] to show the menus, Press, Press [a, ▼] to select the option and press [enter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CANCEL
SETUP
ENTER
RETURN
Numbered
buttons
Common procedures
Remote control only
See page 16 for menu and option details.
1
Press [SETUP] to show the menus.
Pan8sonl
ci
11
n tar
1
tíc
SETUP^
DiscJP
1 Audio
!__ Eigüah _i
1 Subtitle
1 Automatic j
1 Menus
1 English 1
№£Cr TU
1 Ratings
LLovelSigJ
•The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (• page 8).
Press
[ M ,
to select the menu’s tab.
The screen changes to display the menu.
Disc
Video
Audio
Others
Entering a password (Ratings)
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
• If you enter a wrong number, press [CANCEL] to erase it before you
press [ENTER],
•The lock symbol appears closed to show the rating is locked.
•Do not forget your password.
2.
Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD that exceeds the ratings limit you set,
a message appears on the television.
Follow the on-screen instructions.
Digital output
Change the settings when you have connected equipment through this
unit’s DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz. Select
“Yes" if the equipment you connect cannot process signals with a sampling
frequency of 96 kHz,
•Select “No" if you use analog oonneaion irrespective of the type of equipment.
No (Factory preset);
Output as 96 kHz. There is no output if the disc has copy protection. Select
“Yes” in this case.
Yes:
Converted to 48 kHz for output.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM;
Select if the equipment you connected cannot decode the signal.
Off
(Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If
the
equipment
you
connected
cannot
decode
the
signal,
the
setting must be changed to PCM or Off. If not, signals the equipment
cannot
process
wiii
be
output
by
this
unit,
causing
high
levels
of
noise which can damage your hearing and the speakers.
0)
&
Ta
S
c
2
•O
3
Press [A, ▼] to select the item you want to
change and press [ENTER].
4
Press [A, ▼] to select the option and press
[ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN],
To exit the SETUP menu
Press [SETUP].