Code known, Code unknown, Infrared remote codes for specific components – Panasonic CT-27G22 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote (ForCT-27G22/u)

The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION

BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Players, Second
VCR or a DVD.)

Code Known

Use the following procedure for setting up the
remote control using the numerical buttons

when the component’s remote code is known.

m Determine the brand of the component.

P2l Identify the code(s) associated with the

brand from the infrared code index (see
following pages). Record all possible
codes.

Code From

Index Sheet

Confirm that the component is plugged

in and operating properly, then turn it

OFF.

f4l Press and hold theif^ button, then

the

button so that both are

presseHat the same time for at leastl

[Ssejconds. Then let go of the buttons.

Press the appropriate Mode button

for the component.

J Enter the 3-digit code, by using the

Remote

Control

Keypad

“0”

through ”9“ buttons.

№w the remote is set for the

entered code.

[71

Press the button to test the remote. If
the

correct

code

setup

for

the

component (in step H]), the component
will turn on.

NOTE:

Some brands have multiple codes.

Repeat the procedure using another
listed

code

until

the

component

responds correctly.

EUR511051

Code Unknown

Use the following procedure for setting up the
remote control when the component’s remote

access code is not known. This procedure

uses the ’’sequence method”.

Confirm that the component is plugged

in and operating properly, then turn it

OFF.

Press and hold the (^l button,

then the button so that boWi
are pressed at the same time for at

Then let go of the

buttons.

he appropriate Mode button

for the device.

Press the

button to step

over to the next code.

Press the

button to test the

remote. If the correct code is
sent, the component will turn on.

Once the correct code is found,

press the (f^fl button

to store the code.

Repeat from step El above until the
proper component code is found. It
may take several attempts before

the correct code is found.

NOTE:

If an incorrect code is entered, or

when

the

operation

not

completed within 30 seconds, the
settings will not change.

Infrared Remote Codes for Specific Components

Helpful Hint:

Write down the code numbers for your components In the space provided below. This
wiir serve as a handy reference whenever you need to reprogram your remote control.

CABLE

Cable TV Converter Box

□

VCR

Video Cassette Recorder

□ □ □ !

Compact Disc Player

□

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

Laser Disc Player

□

other Component

Other Component

□

1 Other Component

II Other Component

II Other Component |