Panasonic NN-C980w - Manual (Page 22)

To Use Timer Function
This feature allows you to program a Standing Time after
cooking is completed and to program the oven as a
minute timer and/or to program delay start.
To Use as a Kitchen Timer
1 Press Timer
2 Set Desired
Amount of Time
using number pads
(up to 99 minutes and 99 seconds)
3
Press
Time will count down without oven
operating.
To Set Stand Time
Set
Desired
Cooking
Program
Timer I
start
I
e.g. High 10 min.
(See page 12) Press.
To Set Delay Start
Set desired
amount of stand
time.
Press.
Cooking will start.
After cooking, stand
time will count down
without oven operating
Timer — 0
—
9
Press Set desired amount
of delayed time.
Set Desired
Cooking
Program
e.g. High 10 min.
(See page 12)
[ start I
Press
After completed
delayed time,
cooking will start.
NOTE:
1. When the first/second stage has finished, a two beep signal is heard. After all the stages have been
completed, the oven will beep five times.
2. If oven door is opened during the Stand Time or Kitchen Timer, the time in the Menu Action Screen
Display will continue to count down.
3. Delay Start cannot be programmed before any Auto Control Function.
This is to prevent the starting temperature of the food from rising before defrosting or cooking begins.
4. Timer can be set up to 99 minutes and 99 seconds.
22