Panasonic TX-29F155A User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( Picture menu )
Colour temperature
Allow you to set the overall colour tone of the
picture.
Press or QT) to switch between modes.
c
Cool-
•Standard"
Warm
P icture menu 1
Menj
Dynamic
C o n t r a s t
- -- -- -- -- -- -
B r i g h t n e s s
-------
C o l o u r
-------
Sharpr^ess
------------
NTSC'-Tifit
|ilii!l rtii I »TlnffiTninTil C.
0
0
P-NR
{Picture Noise
Reduction)
Automatically reduces unwanted picture noise.
Press or 03 to switch between modes.
P
icture menu
c
Off •
Auto-
■ Weak
> Strong
a
Scan mode
Lets you choose the screen refresh method:
Press (33 or C3 to switch between modes.
[!
Auto-
loom
■ Progressive
!]
Picture mertti
P - M R
Mode
Function
Auto
The TV software will select the best mode for the signal being
viewed.
100Hz
100Hz will give a steady picture for most signal transmission.
Progressive
Recommended when receiving NTSC signals.
Note:
We recommend that you set
Scan mode
to
Progressive
when viewing a PAL 60 or
NTSC transmission. When viewing a PAL transmission (other than PAL 60) with
Scan
mode
set to
Progressive,
the screen will flicker, this is not a fauft.
■'i>- Helpful Hint ( ® Normalization)
By pressing the Normal “N" button on the Remote Control while the Picture menu is displayed, the selected menu
wilt be changed to the Normal mode.
Normalization will not occur if the menu is not displayed when the “N" button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
11