Connecting to a tv set with an s-video input jack, Connection, Connect to the tv set and antenna – Panasonic 3DO INteractive Multiplayer FZ-10 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection
Connecting the player to a TV set (or stereo system, etc.)
Switch off the TV set.
S-video
cable
(not supplied)
Audio/Video
cable
(not supplied)
Connecting to a TV set
with an S-video input jack
It IS recommended that the S-video cable
(not supplied) be used for connection
In this case, disconnect both video plugs
(yellow) of the Audio/Video cable, if it is
used
Use the Audio/Video cable sold on stores
when connecting with a TV set having audio/
video input jacks.
Match up the colors of the jacks and plugs
❖ In the case of connection with RF cable, all
CDs are played in monaural sound
Connect to the TV set
and Antenna.
Set CH SELECT to the channel not
used for broadcasting in your area
(3 or 4), using the tip of a ballpoint
pen or similar instrument
8