Panasonic TC-29V50R - Manual (Page 21)

Remote Control Operation
10. TV/AV Selection Button
TV/AV
Press the button to select the TV mode, AV1
mode or AV2 mode.
The sequence is as below ;
f 1
4.5 MHz MONO
AUTO
MONO SURROUND
V_________ _______ X
AVI
AUTO
MONO SURROUND
Note;
When TV rhode is selected, the last Programme
Number, Sound System, Colour System,
Surround mode and Sound output {depending
on type of broadcasting transmission) mode
will appear.
When AV mode is selected, the last AV mode,
Colour System and Surround mode will appear.
If the S-Video cable is connected to S-Video
Terminal (for AVI only), the selected AV
mode, S-Video symbol “(H*- ” (AV1 only) will
appear on the screen.
e.g. S-Video cable is connected to S-Video
terminal and AV1 Is selected.
AVldi-
AUTO
SURROUND OFF
11. Direct Programme Number
Selection Buttons
Press one of these buttons to select the
required Programme Number between
0 to 9.
12. Two Digit Programme Number
Selection Button
Press the button and following by the required
numbers to select Programme Number from
10 to 59.
e.g. To select Programme Number 12.
1. Press this button once.
2. Press button number ” 1
3. Press button number ’* 2
21