How to cook – Panasonic Rice Cooker/Steamer SR'GO6FG/SR.G10FG/SR.GI8FG User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to cook
Measure rice with the measuring cup
provided.
Then rinse the rice thoroughly using
other container.
Correct
Incorrect
Put the rinsed rice in the pan and add water according to the
scales shown in the table below.
Scales by
Graduations on the Pan
Example. To cook 6 cups of nee, add water up
to the Graduation “6".
Note ■ Capacity iliten vanes according to the size
of each medeis.
Adjust the quantity of water to
your personal taste.
Soak rice in water at least for
30 minutes.
Place the pan Into the body.
Make sure the pan is directly In
contact with the cast heater by .
turning it slightly from right to left
until it settles properly.
■ 5
I Wipe the surface of the pan
before use. If it is wet, it may
cause noise while cooking.
Any foreign matter between
the pan and cast heater may
damage the unit.
Close the lid firmly.
If lid is not securely closed,
cooking will be affected.
Do not open the lid when
in use.
Plug in and press the switch.
The light indicating “ COOK ”
will be on.
The cooking will start
immediately.
Do not plug in the unit until you
are ready to cook. Otherwise,
rice may be ruined.
If the pan is not in the unit,
cooking will not begin.
When the rice is cooked, the switch will move up
to the keep watm, and the ligjt indicating
“ WARM ” will be on insead. This shows that
the warming function is working.
After the switch moves up, leave the lid closed
for at least 15 minutes to fully steam the rice
Scoop and mix the rice well. ,
Unplug.
Only Model SR-G06FG
does not have
warming function.
The light indicating “ COOK "
will be off when the rice is
cooked.
The warming function continues
until the unit is unplugged.
-6-