Gen-lock adjustment installations – Panasonic GP-MS112 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GEN-LOCK ADJUSTMENT
INSTALLATIONS
• Horizontal Phase Adjustment
Adjust the Horizontal Phase Control (15) on the Camera
Control Unit so that the phase of the horizontal blanking
of th camera signal matches that of the Special Effects
Generator.
Ext. sync input signal
Video output signal
• Camera Head
Camera head can be installed to the ceiling, wail etc.
using the threaded 1/4"-20 UNC screw hole of the Tripod
Attachment (Standard Accessory).
1. Loosen the screw of camera holding band until it is
stopped and insert to the camera head.
2.
Loosen the screw of camera holding band.
Note: Do not remove the screw from the band.
3.
Adjust the tilt and rotation of camera head and secure
the screw of camera holding band.
Approx. 130°
Marker of the
top of picture
4.
Mount the tripod attachment onto the tripod or other
mounting bracket (sold separately).
Caution:
If the optional C-mount lens size exceeds 2" (50.8
mm) in diameter, 2-3/4" (70 mm) in, length and 0.66
lbs (300g) in weight, both the camera and lens
should be secured.
- 7 -