Panasonic KX-TS401W - Manual (Page 24)

Programmable Functions
You can program the following functions. Be sure that the handset is on the
cradle and the SP-PHONE indicator light is off.
Line Selection Programming
The unit will automatically select a free line which is not being used by a
parallel connected telephone, when you press iSP-PHONEl or lift the
handset to make a call. Also the unit will select the called line when you
answer a call. To change the line selection, program as follows.
1. Press iPROGRAMl to start programming.
2. Press iHOLDl.
3. Press ®.
• The current setting is displayed.
4. Press (T), [2], (3], [1), © or ® to select the desired line selection.
1: Line 1 will be selected first. (“LI” is displayed).
2; Line 2 will be selected first. (“L2”).
3: Line 3 will be selected first. (“L3”).
4: Line 4 will be selected first. (“L4”).
5: A free line will be selected (Line 1 has priority) when making a call.
The called line will be selected when answering a call. (“AUTO”-this is
the factory preset.)
0: No line will be selected automatically. (“OFF’-you should press the
line button to select the line when making/answering a call.)
• Any line can be selected manually in any mode (0 to 5) by pressing the
line button directly.
24