Panasonic KX-TS401W - Manual (Page 13)

Helpful Information for Making Calls
• The unit will automatically select a free line which is not being used by a
parallel connected telephone when you make a call. (To change the line
selection, see page 24.)
• You may select a line manually by directly pressing the line button. (If the
unit is programmed to select no line, this is indispensable. See page 24.)
• Pressing [CLOCK] during a conversation changes the display from the call
duration to the number dialed alternately.
If you misdial
Press (FLASH] firmly. ^ Dial again.
Putting a call on hold
Press I HOLD I during a conversation. The line indicator flashes green.
• If you are using the handset, you may place it on the cradle.
• To release the hold, press the line button.
You may make or answer a second call on another line while keeping
the present call on hold. See page 16.
What the line indicator means
Light off The line is free.
Light on (Green) The line is selected.
Light on (Red) The line is being used by a parallel connected
telephone.
Flashing (Green) The call is on hold.
Flashing (Red) Receiving a call on the line (p. 15).
13