Set the power switch to “o” (off) when, There is a danger of lightning, Regarding the batteries – Panasonic CSXC181KP User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GftsM ife BoimfQ
Gently press the
place
marlted
[OPEN) and slide
the cover toward
you.
Fix the cover to the back of the remote
control (“PM 12:00” will flash in the opera
tion display.)
©0
Be
sure
that the (+) and
(~)
directions
are correct.
I "I . ri ri
PM ic . uu
^ / I I \
(Two R03 dry-cell
batteries or equivalent)
If the display does not appear when the batteries
are inserted, remove the batteries and
insert them once more.
Make sure that the
signal path is not
obstructed.
The maximum dis
tance at which signals
can be received is
about 10 m.
Aim at the signal receptor on the room air condi
tioner when operating.
Do not drop or throw the remote control.
Do not place the remote control in a location that
is exposed to direct sunlight or next to a heating
unit or other heat source.
Signal received sound.
One short beep or one long beep.
Set the power switch to “O” (OFF) when:
■
The air conditioner is not going to be used for
an extended period of time.
If the power switch is left at “I" (ON), approximately
3.25 watts of electric power are used even if the main
unit is turned off by remote control.
■
There is a danger of lightning.
The air conditioner is provided with a built-in protective
device, but the control equipment may be adversely
affected depending on the extent of lightning activity.
Regarding the batteries.
■
The batteries can be used for approximately one year.
■
Do
not
use
rechargeable
(Ni-Cd)
batteries,
because
such
batteries
differ
from
standard
dry-cell
batteries
in
shape,
dimensions
and
performance.
■
Be sure to replace the batteries with two new
batteries of the same type.
■
Remove the batteries if the air conditioner is not going
to be used for an extended period of time.
8 <